ACEGrid ® Biaxial geogrid Specifications |
|
| |
ACEGrid ® Biaxial geogrid is woven from high-tenacity, multifilament polyester yarns and coated with black PVC which can provide best resistance of UV and durability. High-strength, high modulus, low creep behavior all are the advantages of ACEGrid ® . ACEGrid ® Biaxial geogrid is predominantly used in Mechanically Stabilized Earth (MSE) and Reinforced Soil Slope (RSS) structures.
|
|
|
|
 |
|
 |
Biaxial geogrid |
| Physical Properties |
Units |
GG20-II |
|
| Material |
High Tenacity Polyester Yarn Coated With PVC |
| Aperture Size - MD ± 20% |
mm |
27 |
| Aperture Size - CD ± 20% |
mm |
28 |
|
| PET Yarns Properties |
|
|
|
| Carboxyl End Group(CEG) |
mmol/kg |
19 |
| Molecular Weight |
Mn |
31985 |
|
| Mechanical Index Properties |
|
|
|
| Tensile Strength ,Tult - MD min |
kN/m |
20 |
| Tensile Strength ,Tult - CD min |
kN/m |
20 |
| Elongation - MD |
% |
≦10 |
| Tensile Strength at 2% Strain- MD min |
kN/m |
≧5 |
| Tensile Strength at 5% Strain- MD min |
kN/m |
≧10 |
| LTDS (114 yrs), Tal -MD |
kN/m |
11 |
|
| Dimensional Characteristics |
|
|
|
| Length |
m |
50/100 |
| Width |
m |
4 |
| Area |
m2 |
200/400 |
| Weight of roll - approx. |
kg |
44/88 |
| 20' container capacity - approx. |
m2 |
22,000 |
| 40' container capacity - approx. |
m2 |
44,000 |
| 40'HQ container - approx. |
m2 |
48,000 |
| 40' container /m2 with 3.9m width |
m2 |
64,350 |
| 40'HQ container /m2 with 3.9m width |
m2 |
70,200 |
|
|
|
|
|
|
| 1. |
The values given are indicative and correspond to an average results obtained in our laboratories and testing institutes. The right is reserved to make changes without notice.
|
| |
| 2. |
Information contained in this publication is accurate to the best of the knowledge of ACE Geosynthetics. Any information or advice obtained from ACE Geosynthetics otherwise than by means of this publication and weather relating to ACE Geosynthetics materials or other materials, is also given in good faith. However, it remains at all times, the responsibility of the customer to ensure that ACE Geosynthetics material suitable for the particular purpose intended. Insofar as materials not manufactured or supplied by ACE Geosynthetics are used in conjunction with or instead of ACE Geosynthetics materials, the customer should ensure that he has received from the manufacture or supplier all the technical data and other information relating to such supplied, the application or processing of the products described herein, the use of other materials in lieu of ACE Geosynthetics materials in conjunction with such other materials. |
|
|
|
ACE Geosynthetics |
| |
|
|
|
|
|
